Hi folks, first post on this forum, I hope I'm in the right one. Here's the setup: magic 260, 2x chauvet intimidator xyz, 2x intimidator spot 250. all fixtures are on different channels, set up as fixtures 7, 8, 9, and 10. Everything is working perfectly except fixture 9 (spot 250) does not respond to increased fade time on tilt. Fixture 8 works fine. Both are the 250's and both use the same intimidator spot 250 profile. Auto patch is on in the controller, and if I swap channels on the lights the problem moves to the other light, which tells me its a controller issue. I have a very good understanding of dmx, but am by no means an expert. Any advice would be greatly appreciated!
Original Post