Skip to main content

Hey there!

It looks like I'm going to be one of the first users of the 5R Pro, assuming they arrive on time! I have a dozen scheduled to go out in very early April.

I will need to give the boys at Martin a copy of the DMX map A.S.A.P. so that they can write a profile for my Maxxyz console; and they need a bit of lead time. Can anyone help me out?

Thanks in advance
Original Post

Replies sorted oldest to newest

Hi James - one last request!

Do you happen to have any graphics representing the design & position of the gobos on the rotating and static wheel, as well as the colours on the colour wheel? These will be needed to build a proper profile for the Maxxyz as well. I apologize for the inconvenience..! I'll be sure to post a copy of the profile up here for everyone as soon as I receive it from Martin!

Sincerely
Ya the gobo's and colors for the PRO as the same as the non PRO.
Here are two PDF's. One for colors, one for gobo's.
colors: http://db.tt/M3OiWBN
for colors the order on the wheel for almost all of our fixtures is open/white, red, blue ,green yellow, etc.

gobo's: http://db.tt/R4OvhkY
For the gobo's one. The order I believe goes from left to right in sequential order. But put an "open" before the first gobo on the far left for both rotating and static wheels. Make sense?
Sincerely,
Hmm... I got word from our distributor today that they will not be receiving any until May or June. This puts me in a pretty tough spot..! Do you know if that is a realistic estimate? We placed the order in early December and were told that they'd arrive sometime in March. We're located in Montreal, Canada.

Keep me informed, if you can!

Thanks!

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×