Re: Help Needed

Needing help with adding a Lixada 15W RGBW DMX512 LED Par Light

7 Channels

Channel 1 0-255 Master dimming

Channel 2 0-255 Red dimming

Channel 3 0-255 Green dimming

Channel 4 0-255 Blue dimming

Channel 5 0-255 White dimming

Channel 6 0-255 Function select- 0-5- strobe and linear dimming; 51-100 transition; 101-150 gradient change; 151-200 jump change; 201-255 sound active

Channel 7 0-255 Sets the speed of Ch6 function, from slow to fast

3/18/209:24 AM

❤️ 0

Original Post

Replies sorted oldest to newest

ELA GINESLighting Designer

Greetings what kind of help do you need?? a profile?? if so please specify what model Elation Controller.

3/18/209:31 AM

❤️ 0

Djprimetime87Cable Guy

Yes a profile. Need the fixture added or how do I add type of fixture due to it not being listed in the Emualtion Software.

3/18/209:35 AM

❤️ 0

ELA GINESLighting Designer

got it.. my colleague James will chime in shortly. please note profiles can take 4-48 hours to create.

3/18/209:38 AM

❤️ 0

Djprimetime87Cable Guy

thanks alot. I'm new to this software

3/18/209:49 AM

❤️ 0

Jingles8302Admin

Thanks Gines.
DjPrimeTime, email me so i can send you the XML file directly.
James.keeley@Elationlighting.com
This will only take me a few minutes to create. Thanks!

3/18/209:49 AM

❤️ 0

Djprimetime87Cable Guy

Email sent. Thanks alot

3/18/209:54 AM

❤️ 0

Djprimetime87Cable Guy

Also I was wondering, is there a way to test the USB to DMX cable for the Emulation software to make sure it is properly working?

3/18/209:56 AM

❤️ 0

Jingles8302Admin

All you need to do is plug it in and open emulation, if the red "led" for DMX is on, the cable is detecting just fine on the computer.