adj mega pixel help

What channel mode are you using for them. and no if they are both set the same address BOTH will respond the exact same way. you've got compu live right? Use the channel available to you my friend. do individual addresses. You won't regret it!
Sincerely,

ok i changed the channels to 2 different ones . but dose that mean i have to set up 2 different pages and if so then i can make both bars do the same thing at the same time right ?

and yes im using compu live and im using the profile " mega bar 7 channel " is that the right one ?

should i check the box that sayes matrix ?

sorry for so many questions

What you need to do is create a new page. Select the profile, where it says starting address enter in the 1st fixtures address and then where it says number of fixture type in "2". That will give you one page but access to both fixtures. Mega bar 7 channels is ok. if you want more control go for a higher channel layout like 10 or 11 or something. i am not sure of all the addressing modes. no you do not need to matrix. questins are ok. Better than doing it wrong no?
Sincerely,

after i get done with a show using the adj mega pixel light and turn the computer off the adj pixel light come on by them self and run a factory program show . how do i make it so when i turn off the computer the adj pixel light stay off and dont run

thanks frank

Read your manual on how to change this. Always read the user manual when you get a new fixture.
Sincerely,