I see a video component in the starting parameters of CompuLive. Is it possible to map pixels and feed it with internal video clips. If so, can you point me to a tutorial. Thanks!
josh
Original Post
Replies sorted oldest to newest
Hi Josh. The video function in the software preferences is something for like if you had a external projector hooked up via a HMDI or VGA out of the computers graphics card. This could be used for video mapping LED screens providing you have all the right equipment to achieve this.
Pixel mapping is done in rects in the button editor and is used if you had a LOT of LED pixels that are DMX'd, for example the ADJ flash panels.
I hope this answers your questions. If not let me know.
Sincerely,
Pixel mapping is done in rects in the button editor and is used if you had a LOT of LED pixels that are DMX'd, for example the ADJ flash panels.
I hope this answers your questions. If not let me know.
Sincerely,
Thanks James, my apologies for the delayed response.
Essentially, I have a par can wall that I'd like to animate - preferably by feeding it a video file. (obviously no colors, just intensity).
Is that possible in Compu Live?
Essentially, I have a par can wall that I'd like to animate - preferably by feeding it a video file. (obviously no colors, just intensity).
Is that possible in Compu Live?
Hi Josh. Sorry for the delay. I'm not around the forums much anymore these days.
but intensity only, I think if you were too patch in a page with a bunch of generic par cans as a matrix, this could be achieved....
Hope that helps. If not let me know.
Sincerely,
but intensity only, I think if you were too patch in a page with a bunch of generic par cans as a matrix, this could be achieved....
Hope that helps. If not let me know.
Sincerely,