Need Profile Please

Well these multiple RGB units are a pain as the compu Live software won't allow me to create more than one set of RGB channels. i can make 4,and 7 channels modes no problem at all. But 14 and 26 are tricky but possible if you split up the profile a bit. how many of these fixtures are you using?
Sincerely,

To be honest, I rarely use more than 7 channels. I just want the other profiles just in case.

But I'm using 4 fixtures. Thanks for your help.

OK well I already have the 7 channel mode made.
http://db.tt/AOxiZyt
for the 4 channel there should be a Dimmer RGB profile that works just fine in the generic folder.
for the other channel modes I'll have to think about the best way to make them but i am letting you know now it will probably be about 2-3 fixture pages just to control one unit. it's all because when the program was first coded RGB was JUST coming out and no one had fixtures with more than one set of RGB channels. It was just a unpredictable step for the market.
Sincerely,

Okay cool. The lights are on order right now. Once I get them, I will just try out the 7 channel mode and see if that is enough.

Thanks so much for your help.

Ok. I remember it has about 20 built in macro programs and the next fader is speed for those programs so should have plenty of options. Keep me posted.
Sincerely,

Well honestly speaking I haven't use 7 channels, but next time I wanna try.

Works perfectly Jingles. Thanks! You are correct that the macros give me plenty of options.

I think any more than 7 would be more time consuming to program than it is worth.

My turn to be a pain!

The club I'm working at just installed 8 ColorRail units in the 26 channel mode...

Their version of LightJockey has a feature where it does patterns with LED fixtures which have addressible channels like this one (makes for some cool effects).

I use CompuLive for all of my work, so I need a 26 channel profile (LJ and I haven't gotten along in years) Help please :-)

-DJ

Here you go: http://db.tt/ApP76Z8Q

It's not gonna work well from the fixture page or in the Effects manager.

Welcome to the forums.
Sincerely,

Thanks Jingles, I'll play with it tonight. I started mapping the first RGB segments to the other RGB segments and was able to turn the fixtures to white at the end of the night and scare everyone out of the bar. :-D

Are there any plans to add support for these types of fixtures to CompuLive? I'm starting to see more and more LED fixtures with individually addressable segments to create effects without having to rely on the internal macros of the fixture.

LightJockey does it via the LED-Trix plug-in, quite impressive, though I can't beat the ease of setup with CompuLive. It's nice to walk in and have a full show ready in less than 15 minutes - it's dazzled more than a few bar owners and gotten me at least 2 jobs just because I was able to set up so quickly.

I appreciate all your work!

-DJ

No, Compu Live will only accept .ssl profiles which do not allow the multiple RGB segment fixtures in the .ssl format. However our new software Compu Show will allow that type of profile to be made and used. Depending on which interface you have you may already be able to use Compu Show software. what model interface do you have?

Sticker says 1024EC, since the last software update when I launch the software it says 2048EC... *shrug* :-)

-DJ

Well....consider it a free upgrade of sorts. but no that one is not able to use compu Live. It would need to be a Compu cue Basic or a Compu Cue or also a Compu Show SD.
Hope this helps.
Sincerely,