Robe Dominator 1200 XT

bulletprooflightandsoundMember

Hey guys. I have a Robe Dominator 1200XT that I'm using with Compu-2006 software. The profile for it doesn't control all the mirrors only 2 of them. I've tried to edit the profile but I can only have one X and Y it seems per profile and thats the problem. This light has 6 mirrors. I need to be able to hit circle, for example and have all 6 mirrors move in a circle. Does anyone have a suggestion or a profile that works on this light? Thanks

4/23/101:15 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Ya. I'd be pounding my head against the wall too after looking at the profile. Hello and welcome. I am the Compu live specialist. Let me work on this for you tomorrow. I'll see if i can think of anything.
Sincerely,

4/23/101:59 AM

❤️ 0

Jingles8302Admin

Send me a link to the manual please. Are there different channel modes? Cause on the profile in the library there are only 3 sets of pan and tilt which would be 3 mirrors. I am not doubting though. that is why i would like to look at the manual. Please let me know what channel modes you would like if there are options.
Sincerely,

4/23/102:08 AM

❤️ 0

bulletprooflightandsoundMember

Here is the link.
http://www.robe.cz/products/ar...e/dominator-1200-xt/

4/25/101:01 AM

❤️ 0

Jingles8302Admin

OK Thanks. I'll have this done for you by Tuesday. I will have to split up the profile to accommodate the multiple pan and tilt channels. So for this one fixture there will be at least 2-3 profiles just to operate this one fixture. It will not show right in the 3D at all and to program this unit you will need to use the scene or switch editor windows to get all the channels lined up. Understand? Thanks for the link.
Sincerely,

4/25/102:11 AM

❤️ 0

bulletprooflightandsoundMember

Tuesday will be great James. I don't know how to use the switch editor window to line up all channels. I have the manual and can learn if you can give detailed instructions how to do it.

4/26/1011:19 PM

❤️ 0

Jingles8302Admin

You just need to program that fixture in the master page. Then you'll have full control. understand? Let me know.
P.s. Sorry for the delay in response.
Sincerely,

4/29/102:21 PM

❤️ 0

bulletprooflightandsoundMember

I guess I thought I knew a lot about this software. So to get this right. You're saying the most recent profile 4/09 for the Robe Dominator 1200 will work on all mirrors but I need to program the fixture in the master page instead of in page mode? If so. I don't know how to program it in the master page. Is that in the manual or can you post the method to do that on YouTube?

5/4/109:41 PM

❤️ 0

bulletprooflightandsoundMember

wait. I think I have beed doing that. In tabs view the master page is top left as a red horizontal bar where all fixtures are on. Is that it?

5/4/109:51 PM

❤️ 0

Jingles8302Admin

Yes. That's the master page.
Also have you seen the compu live YouTube channel?
www.YouTube.com/compulivetech
Sincerely,

5/4/1010:15 PM

❤️ 0

bulletprooflightandsoundMember

Also james I never got the profile you said you would write for me on April 25th. I was thinking can you program the other pan and tilt channels for the other 4 mirrors to follow or copy the movements of the primary pan & tilt mirrors? After experimenting with the profile I setup faders for the secondary mirrors so now I can move them where ever but the stay still. I need this solution in 2 days please.

5/4/1010:34 PM

❤️ 0

Jingles8302Admin

I know I sent you the profile that I said I would. Check your email. I sent it to the email account listed on this forum in your account settings. The profile is split up. I cannot add more control other than what is listed in the dmx traits in the manual. And I checked the profile it is all correct. Unless I am not understanding you. Let me know.
Sincerely,

5/5/1012:33 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...