Tagged With "Version 2"
Reply
Re: scene setter 24 dmx channel addressing
Luis, I have tried that numerous times. Granted , it has been about 10 years since I have used DMX lighting. My last controller, An Election was a breeze to address. This is my second Scene Setter 24 in four weeks. The first one my salesperson and I assumed was defective. Now, for many years I have used XLR mic cables and I am learning that they may not work with todays new lighting components. I am assuming there is quit a difference between XLR and DMX cabling... So, I presently have...
Reply
Re: scene setter 24 dmx channel addressing
Hi, try these videos to see if they help: https://youtu.be/wu34OR7BtOA Part 1 https://youtu.be/Zsrpw-PEJxY Part 2
Reply
Re: scene setter 24 dmx channel addressing
Hey Carl, To assign the DMX Channels on "ADJ" branded version of the Scene Setter you will need to do the following: 1. Enter Program Mode by pressing and holding the Record button and entering 1, 6, 6, 8. 2. Enter Channel Assign Mode by pressing and holding the Record button and entering 8, 8, 8. 3. Once this has been done the display will read 001, you can now use the Up or Down button to select the channel (1-512) that you want assigned. 4. Once your desired channel is displayed, tap the...
Reply
Re: E-Builder
Thank you for the immediate response! I have a rental company and have used emulation for years now. I think it's been a year that cuelux started support of the emulation cables and for a brief moment I used it. The thing is that the ''FINE'' movement position does not work for the last 2 versions at least. When we are at a wedding we need to follow the couple with a moving head and witout fine the rotary pan of the midicon cannot control it smoothly. I have e-builder installed on all...
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Thanks SDMAN. I just tried using Scenes instead of Presets, but Scenes seem to have a few different problems: Scenes sometimes want to cancel each other when turning them on. (Does anyone know why this is?) This makes it hard to turn on multiple scenes simultaneously. When a scene fades out, it fades its channels down to zero, rather than letting them stay at their "color scene". I thought "HTP" would allow the highest value to control the channel, but apparently it means a controller will...
Reply
Re: Show Designer 1 Bricked
To whom it may concern, The display PCB's have changed in time but it's the same operating system. It could be either a bad display or a bad PCB inside. If it's within the 2 year warranty your best bet would be to send it in for warranty repair. You can always send an email to rma@elationlighting.com to set you up with a RMA to send it in. If it's not under warranty anymore and if you have another working unit with the same color display, you can always start by trying to swap out the...
Reply
Re: DMX Operator Pro MIDI Spec
Hi Mikey, From what I understand with our consoles, they respont to about 2 scenes per second. Anything faster and they may lose step.
Reply
Re: Compu Pro 06?
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply
Re: gel color in 3d visulizer
For Compu Pro 06 You need to: 1. Open program and 3D visualizer 2. Enter build mode on the 3D visualizer 3. Select the fixture(s) u want to change the color of 4. Select the color on the pallet To help find the buttons...
Reply
Re: need to know???
Hey buddy, This is not the simplest fixture to programm. Its the only fixture of its kind with 2 RGB color mixing options. Most controllers are not set up to offer 2 color mixing pallets. What you have to do is patch the channels to the second group of channels. You do this on the page settings window, then go to channels. Here you will see the fixtures, and channel option. Now you have to find the first red of the fixtures and patch it to the second red, using the "channels patched to...
Reply
Re: powerspot 250 lenses
Yo Tap I have 2 power spot 250 and have around 150 hours on them. What lense needs to be replaced after 2 years or does it go by operating hours ??
Reply
Re: powerspot 250 lenses
Page 40 "The lens should be changed at the first sign of ware, usually in about 1 – 2 years (lens will begin to look cloudy)."
Reply
Re: powerspot 250 lenses
Hey John Hear is a band that ia am working with this sat night. They do all Originals and 1 or 2 covers. There drummer is from California. (OUR AFTER )http://www.myspace.com/ourafter
Reply
Re: Design Spot 250 colour wheel
Yes, we do have a new theatrical DS250 color wheel. The part number is DS250CW2. To determine what the best way to replace it on your specific fixture and to order the part, please give a call to Elation Service at 866.245.6726. Very soon, we plan to have 2 different fixture models for the change in color wheel.
Reply
Re: question about the vision scan 250!
i recently purchased 4 mac entours, 2 visionscan 250`s and a magic 260 controller. i`m having trouble getting to show my scenes in action...i`m really not a software guy, more hardware. i also have a dmx 192 operator w/ joy. just looking for great advice since i upgraded my lightshow from 6 Trackspots w/ universal controller (which i mastered) and wish it didn`t have lightwave protocol. let me know guys...thanx
Reply
Re: What's a good laptop config to run Elation Sofware
here are the specs. Best Performance System Requirements: • Laptop or desktop computer with USB port • Windows XP or any up-to-date version • 1280x1024 screen resolution • 512Mb Memory • Clock frequency: 1.5Ghz • 128Mb RAM video card to use the “3D software” supporting Microsoft DirectX 9.0 but i reccomend more than 2 gb of memory and if you can make sure u have 128 dedicated video memory for 3D visualizer best performance. i have an amd turion 64 bit processor and it works good. i say just...
Reply
Re: What's a good laptop config to run Elation Sofware
Thanks for your assistance and emails... with your help I found the perfect computer Acer Turion 64 2 gig ram with 512 vram. Now if I can just get everything to work. I'm using a wireless remote to trigger Easyshow from my pocket that goes to the audio system with video from the time line going to 2 monitors. The remote systems come from Wirelesswizardry.com. Next is integrating the lights into it all! Franco
Reply
Re: Upgrading to DMX operator 192- need guidance!
ok i will make this quick but if u need more info please ask! 1: yes it will. internal memory and that is what dmx boards do mainly. save show data. 2: nope! 3: no u cannot if u want ot do that get compuware. just my sugestion i love compuware. 4: i dunno the exact term if ur lights dim get the dpdmx20L if u just want to switch them off and on get a switch pack. peace! jingles! lighting guru! LOL
Reply
Re: Basics of Compu Live 06
I spoke to someone from elation support last night and they were able to email the correct ssl file and actually walked me thru the basics of adding the fixtures and programming scenes how do i create a spotlight program i created a scene that blacks out one fixture and points the other toward the center of the floor and used that x/y field to move it, i wanna know if there is a way that i can have 2 fixtures pointed at the same area and follow the other
Reply
Re: Basics of Compu Live 06
i did that, when i setup that switch it just moves to 4 different points in a cycle, the type of spot i was looking for is one that focuses on a certain point stays there until i move it. i was able to achieve this by setting a scene with with 2 fixtures pointed to the same spot and then moving them with the x/y preset button but i'm only able to control one fixture at a time. is there a way to have them both follow one mouse movement?
Reply
Re: Show Designer 3, Fixture Profiles
Hi David, Check out this download when you get a chance, it's the Showdesigner 2 and 3 library creater. You can easily create your own profile. SD LIBRARY CREATOR Best regards,
Reply
Re: Moving Head Hanging Brackets?
what is the size of the truss? IF its a 2 inch pipe you can use the heavy duty round clamps they screw in from top of clamp into the base and the screw does not interfear touching the pipe cause the screw has a flat end.
Reply
Re: Stupid Question but help
thanks mate. u are a great help. well its 4 30 am here so i am off to bed and when i get up you will be sleeping so i wanted to ask u a couple more things i can check the answers to later and if you could answer them then it is much appreciated. 1. i accidentily crossed off the real time screen that shows you the stage and your light show how do i get it back 2. how do i add music to the programme 3 how do i set the lights to follow the music jingles i cannot tell you how grateful i am to...
Reply
Re: Stupid Question but help
ok gn. del. 1) you se in the pic i posted at the top the lil circle with "3D" in it. click that that will re load ur 3d viewer. it looks like this: 2) your gonna want to use the program that comes with the emo called "easy show" it should be on your desktop. 3) to synch the lights to the music u have to first program some scenes and name them or just remember which ones they are. i use the master page alot for this. this is a really deailed part of programming on compuware. maybe i wil make...
Reply
Re: Magic 260
Domi, 1. 1.02 is currently the latest version. 2. When using a preset, the fixture profile must match the fixture. What fixture are you controlling? 3. You'll need to initialize the channel names. When opening the Magic 260 uploader program, close the Ulink Ver 1.08 window. Go to show forms (located on the top left corner) and select EditChName. Select Init and save. The Channel names will now appear when creating a profile. Please call me if you continue to have any problems Sergio C.
Reply
Re: Compu Live Questions
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply
Re: Compu Live Questions
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply
Re: Compu Live Questions
Hi Matchless1 I wanted to jump in and help out a bit. For Q1. You cannot control the speed of a cycle with 1 slider. What you would need to do for this is create steps using EASY STEP in the edit window of a scene. After multiple steps have been created, you need to convert the Easy step to EASY TIME using a yellow button labled Easy Time. This is where the faders Jingles was talking about kick in. Q2. The 3D window works seperatly from the real life fixtures. The attributes created are...
Reply
Re: Compu Live Questions
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply
Re: Compu Live Questions
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply
Re: Design Spot 250 Fade Issues
Hi Joey, That's wierd. I just programmed a few scenes and I am not getting the strobing effect with the design spots. I think its a matter of how your recording your scenes. For example If I have scene 1 lights on with blue wave gobo in position 1. I would then simply bring the dimmer down to zero and record scene 2 with the dimmer all the way down. So when I go from scene 1 to scene 2 and I add a fade time, the dimmer takes the time to dim, and thus no strobing. I just thought about it and...
Reply
Re: Design Spot 250 Fade Issues
i just tried what you suggested and still no luck... here are my steps first on the design spot page i set what i want.. so positions.. and colors..gobo's then i do the same for the other pages.. mostly LED lights once im done setting the scene up i click on the master page logo and press Save Scene.. using the scene fade toolbar i set my fade time.. to 2 seconds.. scene is programmed.. starting on init i click on the scene.. and this is when the strobing occurs.. it isn't a fast strobe..
Reply
Re: Design Spot 250 Fade Issues
Ahhh! Ok.. Your starting from INIT. This makes sense as with INIT all values of the moving light are off. So when you fade on, every function is fading. In programming you need to get used to creating set up scenes. A set up scene is the scene you want to be active before your actual scene comes on. This is what I was talking about when I suggested to create the scene you want, and bring down all the dimmers. Record that as the scene. Position, color, gobo, but dimmer off. then simply turn...
Reply
Re: Design Spot 250 Fade Issues
ok.. i have an the scene setter 2.. but its only for my house and incandescant lighting. it doesn't even have a grand master what is a good midi console? and how to you connect that your computer.. can they go usb as well? how would i learn more about setting up a midi to do sequencing with my lights with a click track also? (and do you know how to set up a fade for cycles) (and is there a hot key for GO during a cycle) sorry a lot of questions
Reply
Re: DMX Operator 192
hey! welcome. a scene is a static look or cue or whatever u want to call it. u acn only record one look per scene. so say u have 2 looks u want to create u move ur scanner or head to the desired psoition and adjust ur color or gobo to whatever u want it at and then record that scene. for the next step u can either keep it in the same position and change just color/gobo or u can move it and change everything. now to have them cycle or chase each other u have to record that as a chase. any...
Reply
Re: Compu Live Questions
Hi Matchless, Yes, I know what your talking about.. and you have a few simple modifications to work with. 1. The Design Spot 250 has two pan degree settings. The degree is the amount of spin from left to right that the light can move. It should be set to 540 degrees on the light to match the 3D window. 2. Once this is done, then on the 3D window you may want to invert the pan and tilt to match the direction of the actual light. Here is a picture to help you find the pan and tilt inversion.
Reply
Re: Compu Live Questions
John, 1. I changed the degree angle from 630 to 540 on the light. I even reset the pan motors on the light. Unfortunately, this did not affect the "home" position of the light. It looks like I'm still off by 45-90 degrees on the pan. 2. Also, I did invert the pan last night to get the movement direction corrected (i.e. Clockwise vs. Counter Clockwise pan). So anyway, ?????, still can't get my "home" positions to match the viewer. And, yes, it does affect every movement in real life after...
Reply
Re: Stage setter 8 question
Thanks for the response. We use 2 elationdmx20l dimmer paks on separate circuits, 4 par cans on each, and to the best of my knowledge the dmx line is terminated properly. I don't believe we are exceeding the maximum load as the lights worked fine all last year.
Reply
Re: Easy Show: Show Video on Second Monitor
With lap tops its a bit more challenging to do this. The problem with Lap Tops is all graphic memory is dedicated to screen 1. Screen 2 gets practically no graphic memory. For this reason the video screen will maximize on screen 1. Your 1st task is to make the second monitor be the primary monitor, and the lap top screen to be the secondary montitor. You can do this in the Display Property settings.
Reply
Re: Master Fade
ya i have the 1024 with the in and out, now how do i assign the 2 dimmer settings from both pages to the controller?
Reply
Re: compu 2006
Nope... i tried reinstalling the software and its still doing the same thing.This is what my CPU has... MICROSOFT WINDOWS XP HOME EDITON VERSION 2002 SERICE PACK 2 INTEL PENTIUM M PROCESSOR 1.73 GHZ 795 MHz, 504 MB OF RAM 80GB OF HARDDRIVE SPACE WHAT COULD BE GOING WRONG??
Reply
Re: Help with buying the best controller
Thanks. now, as far as lightning..i've got not very much experience. i'm trying to light up a stage which is 30ftx20ft. my setup will be, 8 par cans on the back, 2 scanners on the back each one on the sides, 3 colorplash jrs on each side of the front towards the band an the other 2 scanners in te front facin each other, so they'll cover the band and the audience... what do you think? will this give me a nice coverage, im specially concern with the coverage of the LEDs.. don't know if theyll...
Reply
Re: Design 36 LED
switch 7 and 11 on for stand alone mode. 1+7 on = program 1 2+7 on = program 2... All of the programs except #8 (seitch 1+3+7+11) have a strobe part that makes the program look bad. If this is intended then it seems like a mistake.
Reply
Re: Design 36 LED
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply
Re: Compatibility Issue solved.
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply
Re: Two BCF2000 controllers with CompuPro??
are you tryin to hook up both controllers to the dongle at the same time and then have it go out to ur lights? WOW i dunno. i kno you can go in then out to ur board then out to ur lights but i never heard of someone tryin to do 2 boards and compu and lights all at once. can u link me to a web page for the BCF2000's? peace! jingles.
Reply
Re: dj spot 250 & dj scan 250 HELP!
Hey Jake, If you can't get the club to install switches,try a remote switch,you can get a generic wireless at the hadware store for about $25 each.If the lights are too far apart you may need 2 receivers,but it will be "Slick" Good Luck. Gary
Reply
Re: Dmx basic positioning and termination
hey drew! 1) no you can have it all mixed up if you want you just have to address them where you want them is all.so you can have like 2 scanners and two moving heads and have it go scanner head scanner head instaed of feeling like you have to go scanner scanner and then the 2 heads. 2) try putting the hazer as the first in line or maybe try going from lights to haze then back to lights in your line. understand? peace! jingles.
Reply
Re: Playing Drums and Triggering Scenes - Can I Do It?
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply
Re: Design spot 250
Sorry for the confusion...let me try again. I am trying to have the 2 fixtures mirror each others movement. When I set them up both facing the same direction LED front facing the audience and the cables out the back. I reversve the pan & tilt on 1 of the fixtures (so that it mirrors the other) it then rotates 90degrees off. I have to physically rotate the base of the fixture 90 degrees to get the moving heads to mirror each other (which they do). But now I have the bases facing different...