Hi All ,
Using C Loader II to update some fixtures . Worked fine for a few fixtures but now it locks up on the UploadSpeed:Fast screen . Any idea on why this is happening and how to fix it ?
Thanks .
Original Post
Replies sorted oldest to newest
Hi, try taking the battery out for a minute and see if it resets itself that way.
Let us know.
Turns out the updater had to be replaced . Fixtures are updated now but a new problem . One of the Chorus Line 16 has a delay on dimmer and tilt parameters . If I turn off the dimmer it waits 5 seconds before fading out ( all fixtures have the same dim curve and mode ) , same thing happens with tilt , it waits 5 seconds before moving . Is this a setting in the fixture to set the delay time ? Any idea how to fix it ?
Confirm the update did take, then via the menu do a hard reset.
Hi again , the correct updated software version is showing in menu and I did a reset from inside the test menu . Still have the same problem , 5 second delay on dim and tilt . I tried a hard reset also by unplugging power but no difference . Thanks for the help so far , any other ideas ?
LOOKING FOR THE SAME ISSSUE