Hi Ken,
Would you happen to have the Profile for the Chauvet VUE 4.1?
Or a profile I could modify that would work?
I am using the Show Designer 2
Regards, John
Original Post
Replies sorted oldest to newest
I looked through my Chavet list and nothing was close. The Vue 1.1 is different. Do you have the profile builder software? This one duplicates the cluster channel 8 times so you would only have to do it once and then copy it to the other 7 channels.
Hi Ken,
.
I don't know what that is, (Profile Builder Software)
.
Please let me know what that is and I will try to use it.
.
I went to the SD2 "Fixtures" and did not find anything that would work.
.
I also couldn't find a way to create my own Profile.
.
Regards, John
.
I don't know what that is, (Profile Builder Software)
.
Please let me know what that is and I will try to use it.
.
I went to the SD2 "Fixtures" and did not find anything that would work.
.
I also couldn't find a way to create my own Profile.
.
Regards, John
One of the download files on the SD2 web page is the "library creator" software. You can use it to make profiles. You might want to open an existing profile with it to see how it should look first. Otherwise, I might be able to work on it tomorrow for you.
Hi Ken,
I downloaded the "SD2D Library Creator" to my CF Card.
Installed CF card into the SD-2.
I am unsure how to bring it up to the Screen, To Select It.
Regards, John
I downloaded the "SD2D Library Creator" to my CF Card.
Installed CF card into the SD-2.
I am unsure how to bring it up to the Screen, To Select It.
Regards, John
hi jv,
the library creator is to be installed your PC.
you create the library on your PC and load it on your cf card.
then you put the CF card into the SD3 and load only the profile you created.
the library creator is to be installed your PC.
you create the library on your PC and load it on your cf card.
then you put the CF card into the SD3 and load only the profile you created.
The library creator is a program that runs on a Windows PC. It lets you make profile files that you then load into the controller with the CF card. You can then select that fixture profile when you select fixtures from the SD2 menu. You can also get profiles from the Elation web site. If you haven't yet used profiles on your SD2 I would suggest downloading the latest SD2 manual and reading the chapter about using profiles.
Thanks Ken, I will try that.
Regards, John
Regards, John
I made a profile for this, give me your email here and I'll send it.
Thanks Ken,
I almost passed out when I started to build the Profile, (Lots of entries for 2-7)
Regards, John
I almost passed out when I started to build the Profile, (Lots of entries for 2-7)
Regards, John
I can't get that email address to work. Is it right?
Hi Ken,
It was wrong, now correct.
Again, Many Thanks.
Regards, John
It was wrong, now correct.
Again, Many Thanks.
Regards, John
Hi Ken
The Profile works Great, Thanks.
I Promise to only Buy ADJ or Elation Fixtures in the future.
We are a non profit, and several VUE 4.1 were donated to us.
http://www.leapafterschool.com.../About_L.E.A.P..html
Regards, John
The Profile works Great, Thanks.
I Promise to only Buy ADJ or Elation Fixtures in the future.
We are a non profit, and several VUE 4.1 were donated to us.
http://www.leapafterschool.com.../About_L.E.A.P..html
Regards, John