COEmars and elation fixtures on the same control???

Hi Bravo,

This all depends on the console or controller you are using to operate the lights.
If its a universal console, then of course its possible.
However if you are using a special coemar console just for the coemars, I will say it will not be possible.

What type of console are you using? where are you located?

I forgot the exact model of the controller, but i know for a fact it is a universal controller. The coemars are 16 channels each and the Elation Focus Spot 250R are 11 channels each. Can you tell me how i can set them up? Thank you very Much

well how does your controller block the channels? like one fixture button holds like 16 or 32 or 48 dmx channels. let me know then i can tell u how to address them. sincerely,

Hi Bravo, if your controller is universal, then you need to contact customer support for that controller. We can only help you with the Focus Spots, but your support need is with the controller.

Best regards,

So i went out and bought the Compu 1024EC program, the programs is great, however i am having a little problem. My Focus Spots 250 move extremely slow. The Coemars are not as bright as they are suppose to be (they move good though). The manual doesn't give much help. Any suggestions on how to fix this problem. I have them set as 1,17,33,49,65> (thesse are the channels for the coemars) then the focus spot 250 continue as : 81,92,103,114. Am i seeting the channels wrong. Please help if you can.

ybravo,
When you say your focus spots move slow, are you refering to the preset movements of the compu?
Say for example the circle moves slow?
If so, have you adjusted the speed fader to see if it speeds up?

With the Coemars, you need to see if both the dimmer channel and the shutter channel are 100%.
Click on the Center button for that fixture and then from the drop down menu choose button then edit.
look for the dimmer and shutter channels and see if they are 100% if not make them 100% then close the window and save the changes.
If they are already 100% then that's as bright as those fixtures will be. close the window, but do not save the changes.

Best regards,

No, all the preset movements on all those switches (i think thats what they're called)have been set to go as fast as they can, but the focus spot still moves slow. When i activate the Circle Swtich, The coemars move fast, but the focus spot move slow and i moved the speed on the bottom of the circle switch to as high as it goes for both pages. Even when i use my mouse to move them, the focus spot still rspond a lil slow, the move faster with the mouse but not as fast as they suppose to. Help?

hey. have you tried getting rid of the pan and tilt preset speed in the 3D visualiser. here is a picture. if u notice the time and the arrow boxes that i highlighted you can use the arrow buttons to adjust the speed. i always turn these off. to get into to this mode on the 3D click on the hardhat. it is called construction mode.

let me know if you need any help. sincerely,

Do settings in the 3d visualizer affect the settings on the actaul real life fixtures?

they could im not too sure you can test it out. sincerely,

ybravo any progress??

Haven't had the chance to mess around with the lights. I will this saturday... Plus I just Downloaded the latest version of the software from your website, so let me see if that makes any difference.

ok cool keep me posted. sincerely,