I am doing the output settings per port on the enode, I am confused by the numbering system. I set the Principal to 1.0 but it's not universe 10, 0.9 is universe 9, what is universe 10?
Thanks
Original Post
Replies sorted oldest to newest
Currently 0 = universe 1
1 = universe 2
2 = universe 3
This is standard Artnet protocol..
1 = universe 2
2 = universe 3
This is standard Artnet protocol..
Hello Elation_Pro,
I'm pretty sure the eNode 8 Pro only utilizes Art Net, but all over the internet, it says those eNode 8 Pros utilze sACN also. Yes on sACN or no?
Thanks,
Chris
I have 2 of the units. If it's a firmware update thing, please let me know. Thanks
I'm pretty sure the eNode 8 Pro only utilizes Art Net, but all over the internet, it says those eNode 8 Pros utilze sACN also. Yes on sACN or no?
Thanks,
Chris
I have 2 of the units. If it's a firmware update thing, please let me know. Thanks
quote:Originally posted by Christopherfergi:
Hello Elation_Pro,
I'm pretty sure the eNode 8 Pro only utilizes Art Net, but all over the internet, it says those eNode 8 Pros utilze sACN also. Yes on sACN or no?
Thanks,
Chris
I have 2 of the units. If it's a firmware update thing, please let me know. Thanks
Hi Chris, sACN IS supported from what i'm told by our service techs. Let me find out for you if it is a firmware thing or a setting. Can you tell me what firmware version both of your units are?
Chris, shoot us an email at Support@elationlighting.com
Hello, there is already some software to control universes remotely in enode 8 pro