Skip to main content

Hello


As a new member to the Forum and a Newbie to the lighting scene, I would like to ask the members a question. I recently had the chance to pick up 2 Elation T16F light packs, with foot controllers, which will be used for a small Blues act. Is there any way to use these units with a light console as opposed to using the foot switches. Any help or suggestions would be greatly appreciated.

Many thanks
John
Original Post

Replies sorted oldest to newest

From the manual: "DMX mode Be sure the Linkup selector is in "Slave" position. Connect this unit with
a DMX controller, this unit will be controlled by the DMX controller. DMX
value 0-9 of DMX channel 1 activates Stand By, DMX value 10-249
leads to any of 7 scenes or 17 chase patterns. When the DMX value of
channel 1 is among 250-255, this unit will act as a 4 channel dimmer
pack and the start channel is the 2nd DMX channel."
Sincerely,

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×