Platinum Spot 15R Pro

Tommy HMember

Hi guys. I have a Platinum Spot 15r pro that has lost power to the fan that cools the lamp. All of the other low voltage items seem to work so I didn't think it was the power supply. Does anyone have any ideas or has anyone had this problem with this fixture?

Thanks in advance for the help

Tommy

4/17/191:49 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Zach.SRnD Tech

Hey @Tommy H,

Can you follow the Cable of the Fan to the PCB board?

Look for the Molex connector that is Labeled with the Letters JB. JB are the connectors of the Fans.

Make sure they are outputting 24V. If you do not have a meter then you can try connecting the fan into another JB connector located on the same PCB.

Another way to be able to troubleshoot the Fan is to find another 24V fan to plug into the connector to see if maybe you have a bad fan.

4/22/1911:19 AM

❤️ 0

Tommy HMember

Knowing that the fan is labeled JB is a huge advantage. That will help greatly. I did start to trace the fan back until it went into one of the arms of the yoke. The fan is new, it's the first item replaced. I'll keep tracing it back. Thank you so much.

Tommy

4/26/191:24 PM

❤️ 1

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...