I have the software, Compu 1024 EC, to control some elation lights. I also have other sanctuary lights running thru a Lighttronics dimmer and light board. Can I run these lights with the software, and if so, how?
thanks
Original Post
Replies sorted oldest to newest
Kkiger,
In order for this to work you dimmers need to be DMX-512. if you are unsure, check the user manual of your lightronics dimmers.
Multiplex, MPX or analog dimmers will not work and may dammage your Compu 1024 USB Box.
If they are DMX, simply connect purchase a OPTO BRANCH 4
OPTO BRANCH 4
and connect your COMPU, moving lights and dimmers to this, then create a page on your Compu for dimmers.
In order for this to work you dimmers need to be DMX-512. if you are unsure, check the user manual of your lightronics dimmers.
Multiplex, MPX or analog dimmers will not work and may dammage your Compu 1024 USB Box.
If they are DMX, simply connect purchase a OPTO BRANCH 4
OPTO BRANCH 4
and connect your COMPU, moving lights and dimmers to this, then create a page on your Compu for dimmers.
Thanks
The next question, is do I create a page like I did for the Design Spot 575 for example. On the control panel I slider number 35 that runs one light. What do I put on the page when it wants to know the DMX channel to use.
Hope this makes sense.
The next question, is do I create a page like I did for the Design Spot 575 for example. On the control panel I slider number 35 that runs one light. What do I put on the page when it wants to know the DMX channel to use.
Hope this makes sense.