Midi Controllers in Compu Live

Thebadmanor, Welcome to the forums.
I am told you can use two midi controllers with compu live at the same time. I have never done it myself but I believe it should work. give it a try.

I do have the APC 40 midi map made. But not all of the functions are mapped. If you would like for me to send it to you let me know.
We do not have a midi map for the Launchpad.
Sincerely,

Awesome thank you so much for your reply. And yes I would love for you to email me the APC 40 midi map. I'll message you my email address.

This forum does not allow private messaging. It's better to email. Also i would not post your email like that to prevent spam bots from getting your email. I post mine like this: jamesk at elation lighting dot com

Here is a link to download the .zip file that contains the midi map for the apc 40: http://db.tt/FsLYwl
download the zip file to your desktop and then open up a window to the c drive/SL2006/common/Console folder. once you have the console folder open, open the zip file and copy the entire contents of the zip file into the console folder. close both windows when done and launch the compu live program. that's it.
Sincerely,

thanks!

hey, the link to the APC 40 Midi map doesn't work...

Here you go. sorry about that. Some inexperienced user who joined my shared folder deleted a BUNCH of my files. but I restored them.
http://db.tt/FsLYwl

Is it possible to get a MIDI map for the new KORG nanoKontrol2? It is similar to the first generation but has 3 buttons for each of the fader/knob instead of 2. has 8 fader/knob instead of 9. control buttons are also different.

SPWLA, here you go: http://db.tt/m9UauoI5

Copy the contents of the zip and paste it into this file path. C:\SL2006\Common\Console

Sincerely,

Thanks for the MIDI mad for the nanoKontrol2. I copied and pasted the files as you directed into the \SL2006\commons\Console Folder and it appears in the list when I click on console, but the actual device doesn't seem to be corresponding with that console. Compu Live is receiving MIDI data from the device, and the device was working correctly using the Behhrenger Big 10 presets console. Reset the device to factory settings and still can't get it to correspond using the nanoKontrol2 map you just made. Any ideas?

So.. Has anyone actually got an APC 40 up and running with the MIDI MAP provided on here? Added 4 MAC 250s to an already 25 fixture venue and don't think the NanoKontrol2 is going to be sufficient anymore.

ALSO, anyone confirm they are able to use more then one MIDI controller simultaneously? If so, how?

email is sean at surrounded dot la

Here is the map for the ACP40.
http://db.tt/FsLYwl
downlaod the zip file and then copy the contents from inside the zip and paste them too: C:\SL2006\Common\Console

I'm not 100% on the 2 midi devices at once on compu live. Let me get back to you on that one.
Sincerely,

I installed the previously posted APC40 console profile into my COle folder as directed previously in this thread. I plugged the APC 40 in and out of the box the APC40 shows connects and if you click on MIDI TEST you get a response from moving knobs/faders. but when you open the APC40 MIDI MAP it shows no response. Any ideas? The quick start guide that comes with the device states something about a "generic mode" although it doesn't state and I cannot figure out how to put the device into "generic mode"

Here's a guide to working the MIDI without a map. You really don't need one.

JC why don't you write out the direction in a new post and I will sticky it. Cool?

10-4