Recording Factory Chase?

jlivingsMember

Hi,

I am trying to record a factory chase #41(FC) using the SD-2.

Pages 17-19 of the users manual cover most of this, However I can't seem to get the job done.

The biggest issue is page 19 (FC), It states to select the Fixture(s) First,When I do that the selected fixtures "Stops"With no way to record.

I know I must be missing something simple, Any Suggestions?

Regards, John

7/6/114:44 PM

❤️ 0

Original Post

Replies sorted oldest to newest

jlivingsMember

While trying to figure things out, I erased my memory, I did not know it would erase the Profiles that I had already downloaded.(All the included profiles still exist)

Please send me the profiles for;

ADJ Vizi Spot LED

ADJ Vizi Wash 108 LED

Chauvet Vue 4.1

Thanks, John

7/6/119:54 PM

❤️ 0

jlivingsMember

Sorry for the second post,I did retrieve the profiles.

Still need suggestions for the FC Recording.

thanks, John

7/6/1111:10 PM

❤️ 0

sdmanMember

John, are you trying to use the factory chase in a scene? The factory chases are pre-written so they can't be recorded over. They are there to be used in scenes or played live. You can modify the center points though from the main menu.

7/7/116:02 PM

❤️ 0

jlivingsMember

Hi Ken,

Thanks for the reply.

Yes I am trying to record the factory chase into a scene.

Regards, John

7/8/115:22 PM

❤️ 0

sdmanMember

First turn on the fixtures you want to use. They must have pan and tilt control. Next, try the different chases to see if any will do what you need. Finally save the scene while the chase is running.

7/8/115:49 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...