Controlling dimmer pack

jameyhMember

I have 3 lightronics AR-1202 dimmer packs that are currently controlled via DMX by a leprechon board. They do things very differently for "traditional" dimmer circuits, even though it's obvious it is done with DMX. How would I go about getting control of these dimmer packs through my emulation software?

12/10/1010:29 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

I checked out the manual for those dimmer packs. If you know the starting address and number of channels you should be able to patch them in using the generic dimmer profile. Let me know if this helps.
Sincerely,

12/10/1011:07 AM

❤️ 0

jameyhMember

For a noob... when figuring number of channels, we're talking 1 channel per circuit, right? The AR-1202 has 12 circuits, so it should use 12 DMX channels, right?

12/10/1011:43 AM

❤️ 0

Jingles8302Admin

Correct it is a 12 channel pack. Take a look at the pic.

The reason I have it on 4 channel pack and 3 of them is just for example. in emulation we cannot assign more than 10 dimmer channels to one fixture. So you can split this up any way you like. For example. two of the 6 channel packs, four 3 channel packs, etc. Let me know if this helps.
Sincerely,

12/10/1011:59 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...