Custom MIDI Map for APC 40

I am running Serato and Emulation, sometimes simultaneously and would like to use my APC40 to control both software. Does Emulation have a "learn" mode like Serato, to program it, or is there a script I can follow to write a custom xml map?

3/11/121:52 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

You will not be able to run the two together. You cannot split the USB driver between two programs. It has to be dedicated to just one. Make sense?
Also in the emulation manual there should be a picture that tells you how the midi is mapped for the APC40. You cannot re map it or make changes unless you are familiar with XML coding and the software functions.
Sincerely,

3/11/1212:26 PM

❤️ 0

penguinlove777Member

Here's what I'm hoping to do. I will be using the top pads and knobs to control Serato, and the bottom half for Emulation. I am wanting the programmer parameters knobs to be dynamic and change depending on the programmer tab you are on, ie: in beam, knobs control dim, iris, focus, etc., in color mix they control red, green, blue, etc.

3/11/1212:34 PM

❤️ 0

Jingles8302Admin

No. I'm sorry that will not work. As I said in my previous post the USB driver cannot be split between two program at the same exact time. Even if there were some sort of "midi config 1 and 2" button to switch it will not work. Sorry.

3/11/126:12 PM

❤️ 0

penguinlove777Member

I don't see the midi map in the manual, do you have a link to an updated one?

3/12/1211:30 AM

❤️ 0

Jingles8302Admin

I thought it was in there but I guess not. I have a picture of the layout which you can view here: http://db.tt/ey3SJUJs
Sincerely,

3/12/1211:51 AM

❤️ 0