Design Spot 250 Focus issue

Hi NHNaz,
It's impossible to focus both at the same time. Since they are 5-8mm away from each other the focus lens can't adjust to both.
The only way they can be focused at the same time would be if the gobos were right on top of each other.
Having the gobos this way allows you to reach a focus in between.
Also creating a scene focused on one gobo then switching and focusing to the next would be called Gobo morphing.

Best regards,

Hey John, I think NHNaz is saying that with two separate DS250s, when controlling both at the same time, they focus on the rotating wheel together but not the fixed.

The focus on the fixed wheel on one of the DS250s is off is I think what NHNaz is trying to convey.

Yes SerraAva, you have it right! If I put both units on the same rotating gobo they both are in focus. If I put both units on the same fixed gobo, one unit is in focus while the other isn't.

This is strange.. haven't heard of this before, and again, it doesn't make much sense.
considering all the compenents inside the fixture are in the same place. I'm setting up two fixtures here.
can you e-mail me serial numbers?
info at elationlighting dot com.

Thank you,

hello, please give me a call when you are in front of the units. thank you
Gines Gines
323-213-4555