dmx operator pro

Salanimi,
The Dmx Operator Pro no longer has a polarity switch.

Are you trying to change the output channel for a particular slider or simply assign the joystick?

"Then are scenes supposed to shop chases even if they have different fixtures? "
I don't understand what you mean by this.

quote:

Originally posted by Surge ProTech:
Salanimi,
The Dmx Operator Pro no longer has a polarity switch.

Are you trying to change the output channel for a particular slider or simply assign the joystick?

"Then are scenes supposed to shop chases even if they have different fixtures? "
I don't understand what you mean by this.

Joystick assing works ok. But when I try to change output channel gives nothing but "err" on screen.

If I press scene button, every chases running at the moment stops. But if I press scene button first and chase after both works at the same time. Is this the way it is supposed to work?

Salanimi,
The Dmx Operator Pro is two boards in one, which means you can select a scene or chase at the same time as long as they're on opposite sides from one another. For example, select a chase on the left side of the board and a scene on the right side. It will not allow you to select a scene or chase at the same time, on the same side.

Actually in par side of op pro is is possible to select chase on scenes and opposide, but in intelligent side it is not. Shame.

What is btw latest software version of dmx operator pro?

Channel assing problem is now solved.

Salanimi
The latest software version is at 1.74