Elation LED TRI64 malfunction

alpha007Member

Hello,
I have interesting problem with my LED PAR64. After I plug it in, all LEDs star shining at 100%, but display with buttons (to set DMX address) doesn't work at all. The fan inside light doesn't start too. Any tips? Thank you.

PS.: it is about half a year after the warranty passed

10/9/1211:35 AM

❤️ 0

Original Post

Replies sorted oldest to newest

JWPardee (Guest)

the only way to know for sure would be to open it up and trouble shoot it, however, that sounds like your display pcb went bad or your main pcb depending on which controls the fan control my bet would be the display board

11/7/128:50 AM

❤️ 0

mayeendu2013Member

If the fixtures have any sort of integral DMX Termination, that may be the problem. But at the price of the fixture, that's probably not the case.

Assuming you are actually using DMX cable (not mic cable), then my first suggestion would be to put a DMX Terminator at the end of the line. If you don't want to buy one, see below for how to build one into an XLR connector.

3/10/135:55 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...