Fixture for Phantom 50 LED Spot

offen93Member

Hello, I´m new on this Forom and come from Germany! I need a fixture for the Movinghead -Showtec Phantom 250 Spot-.

Here is the DMX Protocol: www.highlite.nl/silver.downloa...187_MANUAL_GB_V1.pdf
(page 17-19)

I work in the 8 and 13 Channel Modos!

Can sombodey help me??

Thank you

2/28/128:07 AM

❤️ 0

Original Post

Replies sorted oldest to newest

offen93Member

Sorry the link in the first posting don´t work!

http://www.highlite.nl/silver....187_MANUAL_GB_V1.pdf

2/28/128:10 AM

❤️ 0

Jingles8302Admin

I believe this profile is in this file.
http://db.tt/Lbk0V5cn
If you need help placing this file let me know if you are using Mac or windows and also if you have the Builder program installed.
Sincerely,

2/28/1210:05 AM

❤️ 0

offen93Member

Hello.
I just scrolled through the file, but I have no profile for the Phantom 50 LED-showtec found.
But I add the file first and look again....
How I add a file? Windows 64 bit.
Thank you very much
Offen93

2/28/122:01 PM

❤️ 0

offen93Member

Sorry. I almost forgot.
I've just installed the DMX software emulation.

2/28/122:04 PM

❤️ 0

Jingles8302Admin

place the file in
C:\Users\(Username)\Documents\Elation\Emulation\Personalities\User

Then in emulation in the patch list scroll down to the very bottom and when you see {Users}Showtec the file should be in there.

2/28/122:10 PM

❤️ 0

offen93Member

Hello.
I added the file, but the profile for the "Showtec Phantom 50 LED Spot" is not in there.

How can I get the profile? Is it written by Elation?

Thank you for the efforts
Offen93

2/29/125:56 AM

❤️ 0

Jingles8302Admin

Sorry about that. I had two copies of that xml. I sent the wrong one out. Here is the link again but with the updated file.
http://db.tt/1Fnj5QVQ
Repeat the steps i mentioned before for putting it into the program. Thanks.
Sorry.
Sincerely,

2/29/121:43 PM

❤️ 0

offen93Member

Thanks for the help. If I'm having problems I like to contact again. Super service, I´m very happy!

Offen 93

2/29/122:23 PM

❤️ 0

Jingles8302Admin

Sure if you need more help let me know.
Sincerely,

2/29/122:40 PM

❤️ 0