New to the whole lighinting thing

ricky1066Member

Ok I have to be honest and say I have no idea on any intelligent lighting I am new to it.I have been using sound activated systems for years.

Can any of you guys give me some tips to the lights .
I have the elation 192 and two chauver q 575 moving heads
I had the guy in the store hook them up he says I never have to move the buttons on the back of the lights again ? IS this true

How hard it is to set some scenes ? What I want fo now is the strobing in all colors as it scans the room
and then I want it to change colores and gobos as it scans the room

Can anyone explain how to do that

Thanks and HEllo

6/16/089:06 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Ricky, Welcome to the forums! first let me say that is pretty much true you may never have to set them again. as long as the fixtures remember the address. i also urge you to take a look at the dmx chart for your lights and read up on the op 192 manual. as those two references are key to programming your lights the way you want too. on the op it is NOT hard at all to program a few scenes. let me know if you have any questions or if you are interested in a DVD on how to operate your DMX op 192. Sincerely,

6/16/0811:48 AM

❤️ 0

stevetMember

I have put up a post and would like it very much if someone would take a look and give me some feedback.

Thanks,

SteveT

6/16/082:53 PM

❤️ 0

Jingles8302Admin

Steve link me to your post and I'll take a look at it. I dont know which post your refering too. Thanks. Sincerely,

6/16/083:37 PM

❤️ 0