Par 56 and SD3

Hi Lechu,

You will either need to choose the 32channel fixture, then modify it to have 5 channels and assign the dimmer.

Or

you can create your own profile using this simple software.
http://www.elationlighting.com/pdffiles/SD2D%20Library%20Creator.zip

I would recomend creating your own profile.

Best regards,

Thank you for your quick response. I'll try creating my own profile.

Regards

Lechu

Here is what's happening. I created a profile and I'm able to control colors, strobe, etc... Now I have an issue that once I connect 3 or 4 of them and assign the channels (1-5 for first 6-11 for second 12-17 for third and so on) only the first fixture property can be changed and at the same time it changes the rest of them, but if I want to change lets say color on the other fixtures they do not respond to changes. Is that normal? Do I have to break them by other type of fixture?

Well, I actually solve my problem. First I moved the fixture addresses to 1-16, 17-33, 34-49 etc... Then I found the dip switch configuration... and that's it! It works!