Please create a profile for Martin Roboscan 1220 CMYR. Here is the link for the DMX Protocol, need Mode 1.
http://www.martin.com/service/...o1220CMYR_DMX_V4.htm
Thank you,
Original Post
Replies sorted oldest to newest
Angel, welcome to the forums. Give me until the end of the day Tuesday to get this made for you. OK?
Sincerely,
Sincerely,
Thanks for the response.
Angel I have this done but since Martin likes to do weird traits which makes it hard for us software guys to make profiles I am having the profile I made for this checked out by our engineer. If you need it ASAP let me know and I can link you to it. but I should know for sure if its good by Wednesday morning. You've been very patient and I appreciate it. Let me know thanks.
Sincerely,
Sincerely,
Wednesday morning is fine.
angel sorry for the delay. turns out i need to make a few changes to the profile. I am working on it right now and will send to you in just a bit. It is my top priority for today.
Sincerely,
Sincerely,
Ok here you go: http://db.tt/KWRPDVD
it's done and it should work good.
Do you know how to place the file on your Mac or Windows and then patch it into the program?
it's done and it should work good.
Do you know how to place the file on your Mac or Windows and then patch it into the program?
No, please send the steps to upload on a Mac
Thank you
Thank you
/Users/[username]/Elation/Common/Factory
but instead of a factory folder look for Users and place the XML file into the user folder.
Once the file is copied there open up the Emulation program and then in the patch part where it lists the manufacturers scroll down to the bottom and of the list and you will see [User]Martin. your profile is labeled RoboScan PRO 1220 CMYR v4.
Sincerely,
but instead of a factory folder look for Users and place the XML file into the user folder.
Once the file is copied there open up the Emulation program and then in the patch part where it lists the manufacturers scroll down to the bottom and of the list and you will see [User]Martin. your profile is labeled RoboScan PRO 1220 CMYR v4.
Sincerely,
James,
I tried the program found issues with the Frost, Prism, and Rotation. Fixture did not rotate at all and when I when Frost was used the Prism started.
I tried the program found issues with the Frost, Prism, and Rotation. Fixture did not rotate at all and when I when Frost was used the Prism started.
Hmmmm I swore I tried it and it looked good in the program. I'll take a look at this tonight. Thanks for the feedback.
Sincerely,
Sincerely,
Ok I checked the whole profile and made a few changes. Frost should now give you a full fader range for the values for frost. The gobo's were outputting the values it says for the manual. but in the Custom part I gave you faders for the first half of the color channels and the gobo wheel 1 channel. Try those.
Link: http://db.tt/KWRPDVD
hope this fixes it.
Sincerely,
Link: http://db.tt/KWRPDVD
hope this fixes it.
Sincerely,