Can't Get Light 2 to work! (DMX Operator Pro)

Hi CJCURL and welcome to the forums.

Can you provide a link to the light in question? It sounds like you might have a control and/or color macro channel on and this is why the lights are acting odd. It might also be an addressing/setup issue. Have you tried the setup on another DMX console and experienced the same issues?

Let us know and hopefully we can help resolve this issue for you. Once again, welcome to the forums.

Here is the link:
http://www.idjnow.com/StoreMod...s.aspx/PID=LEDPALLET
The brand name is Chauvet.

We haven't tried it with another DMX Console. We just bought the DMX Operator Pro for a Church Easter Production, and are still trying to work out the glitches.

Thanks for the welcome, and any help.

Okay, that helps.

Next questions, what channel mode are you trying to use them in and what addresses are they set to? Since you don't have another console to see if its a patching error, I will try and help confirm that the settings on the fixtures are correct.

We're in six channel mode, so that 4/12 is red, 5/12 is green, and 6/12 is blue.

The address for the colorpalettes is 1/17.

Does that help at all?

Hi CJ,

Here's what I recommend.
Set the second panel exactly as the first panel.

Address and all. They should do the exact same thing when you use the DMX operator pro. This is your starting point.

When and if they do the same thing or not, then it sounds like anything would be an issue with your light.
You should contact the manufacturer of the light which is Chuavet as this forum is only to support the Elation products. Once you get the Chauvet lights figured out and you have questions on the DMX Operator Pro get back to us on this forum or we can send you a DVD on how to use DMX Operator Pro.
Simpy e-mail support@elationlighting.com with your name and address and a DVD will be sent free of charge.

Best regards,