DMX OPERATOR CONTROLLER... Strobe help please...

No Reply in 4 days?
I assume there is a problem tech support?

Hi RedX.. i believe our operator pro surge protect is on Vacation. i'm sure he will reply when he returns. He would know best.

Redx,
I've never heard of or encountered this problem before. I'd like to ask you a few questions.

What model units are you controlling?

Have you tried programming scenes with different strobe speed? If so, do you get the same results or does it only affect the stobe speed at full?

Can you try just one unit by itself with the controller?

COLORKEY LED Par 64 10mm V2 6 channel dmx
and
Deliya par 64 led 4 channel dmx.

One at a time does the same thing.
Singularly on a 2 foot DMX cable from the OPERATOR.
Ive run speed and fade variations during and after
playback still the same.It slows down even more when fade time is set to
0. It has an uneven strobe effect if fade is above 0.
I am seeing about 15-20 fps when in program mode.
I then either record the scene and remove the program button
and the speed slows down to about 5 fps.
What is the deal?
I have also tried the Venue par 64 led 6 dmx can with the same
outcome.
Please let me know if there is something I need to do.

Thanks

Redx,
I hooked up some LED's with similar DMX traits as your Colorkey LED's and after many attempts I was able to create a slight change in the strobe speed (when in and out of program mode). I could only see it on certain colors and it wasn't very noticeable.

I am sorry to have to say this, but I don't believe there's a way around this.

Thanks for the help. I will offset two cans at a time to create the fast strobe look...

Thanks