Profile request: ADJ Mega Bar 50 RGB

BTT. Anybody wanna help me here?

I do apologize. I did not see this post. From this link you can download the updated library. your fixture should be in the american dj folder.
http://www.elationlighting.com...dated%2011.11.09.zip
Let me know if this helps. Again i do apologize for the delay.
Sincerely,

Thanks, Jingles. And no worries. I haven't installed these on my rig yet. Just wanted to be ready when I do.

Thanks again!

I don't see the profile listed as per the exact ADJ product name: Mega Bar 50 RGB

Any of the profiles I try that have mega bar in the title don't work correctly with this light. To be specific, the one I'm wanting a profile for is this one: http://www.americandj.com/Prod...nId=2&Category=L.E.D.

Have you downloaded the latest april update to the scan library?
you can download it HERE.
Sincerely,

Yes, I have. It's not there. Under the following headings: ADJ/MEGA SERIES there are two called Mega Bar 50 (one 6 channel and one 7 channel) but neither of those work correctly for this light. There are also some various Mega Bars listed in the main directory, but not this one.

This is the MEGA BAR 50 RGB

The RGB designation seems to be the one that sets it apart.

if it is mega bar 50 then it should work. which channel mode are you looking for? Let me know.
Sincerely,

Hi all. I took a break since someone felt I contributed useful information too much. Sorry, I'll go crash down the stairs head-first and knock my IQ down a few dozen points.

Back on topic.

The Mega Bar 50 is the same as the Mega Bar 50 RGB. Just a different name best I can tell. When I bought them, they were SKU'd "Mega Bar 50 RGB". RGB, LED, Well, BFD, it's all the SDT(same damn thing! I made that up, I claim it!)

I think the problem might be a bit more basic. Now, I have 4 of these. Out of the box, worked fine. I put them in 7 channel mode. Each has its own address. I already was programming them in MyDMX, so when I added the real thing into my rig, they worked immediately.

Just make sure you choose your correct mode and make sure you choose the correct profile to match. Assign the addresses and you're good. You want to read your manual to set the fixtures into the right mode as it's not straight-forward by numbers.

Did I mention that I'm a bonehead?

Makes a difference when you do something radical like read the product manual and set it to the right channel mode.

Thanks, gang!

No problem. Glad you got it working. If you need anything else feel free to start a new thread.
Sincerely,