Skip to main content

Tagged With "Software Uploader"

Everything
Reply

Re: pics of my designs on compuware.

Jingles8302 ·
i got a lil mix of lil video clips i recorded using fraps coming too. might take a while to upload though. 22 MB's i'll let u know! peace! jingles
Reply

Re: DMX Duo

zargon ·
I like the fact that the Duo is a 1u system as I am trying to keep things compact for my mobile show. As it sits right now I will be using the DMX portion of the Duo to control the Color Strips. I would like to control each color as independent washes (ie blue for slow dance) and then from there any of the chases etc than can be accomplished. I have downloaded and installed the software for the Duo to upload and backup scenes, thinking (I was told) that it would let me program it. So, how...
Reply

Re: CKC Profile

Jingles8302 ·
oh ok cool. Send me a copy to James k at elation lighting. DOT com so that way I can upload them. Thanks. Sincerely,
Reply

Re: Few Questions: Compression, Consoles, Omega Profile

Jingles8302 ·
hotdog! wassup? i uploaded a quick video to you tube on how to do this the right way. you really dont need to use the drop down once you create your new preset. Watch the video here. http://www.youtube.com/watch?v=7AAkig1XKpQ 2) i am not sure if we have that available or not. i am asking now. 3) thanks for pointing that out ill fix it on mine and upload it. Sincerely,
Reply

Re: programming help please

Jingles8302 ·
i am not quite sure i understand. a screen shot would be helpfull. check out www.photobucket.com once you upload the pic. in the post writing window there is a icon of a pic. it is the second to last. simply copy the image URL you get from photobucket and paste it into the text field that comes up when you click on the icon on the photo. Let me know if you need help. or email me the pic at james k At elation lighting DOT COM Sincerely,
Reply

Re: Magic 260 Controller Failure

RSM ·
If you can not add or select fixtures you've lost your light fixture profile. If the internal battery dies (small round battery like in a watch) and you turn power off you'll loose this profile. ULink (upload) new profile. Can find instructions on Elation support Downloads. If the 260 cycles and does not load/boot up, then its a firmware issue. If firmware is corrupt and 260 not responding: Press and hold function buttons 1, 10, 20 and 24 and turn this unit on. Then send firmware file for...
Reply

Re: triger troubles

studio42 ·
Hmm, so I was right about the caps lock thing. Must be some Linux guys doing the programming, or at least using the Unix/Linux mindset(which I wish more users would follow). Thing of it this way though, now you've got effectively twice the number of triggers available, one set with the caps ON and one set with the caps OFF. That was a shot in the dark for me but something just trigged the "check the caps lock" suggestion. Since I use Linux for my web hosting platform, I have some familiarity...
Reply

Re: iphone connection in latest version

Jingles8302 ·
FBC thanks for letting us know I will tell our developer. We should have new versions to upload soon. Sincerely,
Reply

Re: CueCable drivers for Vista and Windows 7

Jingles8302 ·
You upload to a website like www.photobucket.com and copy an paste the IMG code.
Reply

Re: I/O Contacts

Jingles8302 ·
ya give me a little bit and i will re upload.
Reply

Re: Programing

Jingles8302 ·
Sure that would be great. Email it too jamesk (at) elation lighting (dot)(com) and I will be sure to replace it in the library and upload it to our servers. Thanks! Sincerely,
Reply

Re: Fader Start

styler42 ·
Yes, mac. I would post a screen but I am not able to upload it anywhere at the moment. Wonder if its the screen resolution.
Reply

Re: DMX Operator 192 - software

hobson ·
John, I want to make sure Kevin doesn't misinterpret your answer. I think he was asking if you can set up scenes with software and upload your work into a 192, and, if not, does elation have a controller that can do that. Your email could be interpreted to mean that you can set up a virtual 3D stage and record scenes using Compu 3D and then upload your work into the Operator Pro. I wasn't aware that you can do that, but if that is what you intended, please confirm. I think you meant it to...
Reply

Re: What's the difference?

Jingles8302 ·
I'll have to upload it. I'll link you later on today. Sincerely,
Reply

Re: problems with chauvet mini

Jingles8302 ·
No need to post your email. I upload all profiles to a FTP site and post links for anyone to download. You also might not want to post your email as there are spam bots that scan posts for emails. Sincerely,
Reply

Re: Midicon firmware update

studio42 ·
It is believable to require a new machine to require a firmware update. Items ship, while firmware development continues. At some point, the new firmware is released while previously shipped items are still on shelves awaiting purchase. At the same time, I'm rather surprised that there isn't some method to update the firmware that can be done at a end-user level. However, sometimes, firmware is delivered via ROMS instead of via download, often because the firmware requires a larger ROM or...
Reply

Re: Venue Par 64

Jingles8302 ·
Sweet! Thanks. I'm glad I could help out. Now I can upload that as a "manufacturer" profile. Thank you for your quick feedback. Sincerely,
Reply

Re: iphone connection in latest version

shihp001 ·
Since I can't upload the screen shot, here is the info you asking for. Under the Emulator, options, port is 8888, and its says browse to http://10.0.154:8888 . My iPhone, ip address is 10.0.1.60, and subnet mask is 255.255.255.0. Please advise. Happy Thanksgiving.
Reply

Re: Why can't I get the profiles from the web library

Jingles8302 ·
This is the link I use for my dropbox. it is for the entire library for compu show and compu live. https://www.dropbox.com/sh/iuy35vs66wmgknp/v60S-1jn0V The respective folders are updated anytime I upload a new profile I have created. Personally I love and use compu show. Here is a link to the latest release of compu show. Let me know if it crashes and if it does please go ahead and send me the crash reports so we can fix the issue. https://www.dropbox.com/s/c5ac...ta1jc5/CompuShow.exe Hope...
Reply

Re: Building Profiles

joec29 ·
Can someone make me a profile for a WPAL 60LED Scanner? I can email a PDF of the instruction manual. I tried to post it here, but I don't see an upload option.
Reply

Re: Building Profiles

joec29 ·
Thanks Jack. I sent Joel an email a few days ago but haven't heard anything, so I'll send you an email too if that's okay. I tried making it myself, but I must be missing a step somewhere. I wish there was a manual or video to make the profiles and upload them. Thanks again for any help you can offer! Joe
Reply

Re: REL

styler42 ·
I am experiencing this issue. Running latest build, on Win7 and Mac OSX. I have a screen shot, but I dont have a site to upload it to. BTW thats a really archaic means of posting images. The cue in slot 1 is stuck in an "orange" state reading REL and the cue continues to play. The other cues are even in a bundle with the cue in slot 1. I have tried releasing the cue every way I can think of. The only resolution is to restart the software. I am able to recreate this by mashing buttons on my...
Reply

Re: Chauvet Profiles

xiansam ·
I've written fixture profiles with mixed results. Is there a place to post or upload *.sdf files? I'd like to compare mine to others as well as figure out my mistakes. I'm currently working with SD3 and the fixtures include Chauvet Q-Spot 560LED, Q-Wash 560ZLED, COLORado 2 Zoom Tour and COLORado Batten 72 Tour. Thanks, Christian Samuelson xian@xrosspointav.com
Reply

Re: Wierd bugs with SD3

chrisk ·
Honestly, I'm probably complaining a little. But really why wouldn't you just make it so you could use a simple flash drive to upload profiles and save programming instead of a CF card? I'm completely ignorant on the actual manufacturing process of devices like this but I know that the higher end ETC boards have this feature and Elation is a branch off company of ETC isn't it?
Reply

Re: eBuilder Manual?

strijbosandvanrijswijk ·
I found the fixture folder with models represented in an .xml file. I also found an upload xml file from my own attempt to create a personality file. Could it work if I paste this file in the user fixture folder? I can hardly belief this is the way to do it. Best regards, Jeroen
Reply

Re: Show Designer 1

djqs238 ·
I am looking for an easy way to design scenes and chases. The ideal would be a dmx emulator that I can create a scene or chase and the either upload those to the SD1 or have the steps/config settings to manually program the scene as it is difficult to do so on the SD1 directly.
Reply

Re: Software to test lights connected to eNode 4

Ricardo C. ·
If you are using a notebook running Windows OS, you should try ONYX. It's free to use and you can take advantage of the 4 free universes that come with the software. https://obsidiancontrol.box.com/v/getonyx
Topic Featured

E-LOADER III Software Uploader

Zach.S ·
E-Loader III Upload Instructions
Topic

KL Fresnel 8 Fixture Firmware

Zach.S ·
Necessary upload tool: CUE Software Uploader KL FRESNEL 8_V1.07 Firmware changes description: 2 extra dmx channels and "stage 2" dimmer curve added You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If...
Topic

WW Profile HP IP Fixture Firmware

Zach.S ·
Upload tool: E Loader III WW Profile HP IP_V1.0.9 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Enode 2 POE Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader ENode2 POE_V1.3 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Beam Fixture Firmware

Zach.S ·
Upload tool: E Loader III Proteus Beam_V1.6.0 Only for V1.6.X units Proteus Beam_V1.5.1 Only for V1.5.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed,...
Topic

Platinum FLX Fixture Firmware

Zach.S ·
Upload tool: E Loader III PLATINUM FLX_ V1.8.2 Final Only for V1.8.X units . For more information please contact zach.santana@elationlighting.com You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you...
Topic

Platinum HFX Firmware

Zach.S ·
Upload tool: E Loader III PLATINUM HFX V1.3.6 Final Only for V1.3.X units PLATINUM HFX_V1.4.0 Final Only for V1.4.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

Level Q7

Zach.S ·
Upload tool: E Loader III LEVEL Q7_V1.05 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Level Q7IP

Zach.S ·
Upload tool: E Loader III LEVEL Q7 IP_V1.05 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Software to test lights connected to eNode 4

Perry Beatty ·
Can anyone recommend a basic software application that can be used to test lights connected to the eNode 4 units? I would like to connect my notebook to the network and be able to make sure the lights are operational for the dimmer board operator. Similar to how you would use a Swisson or DMX Cat.
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Show Designer 1 Bricked

ProfFilament ·
Hello, This is my first time posting on these forums, so please let me know if there is a better place for me to post about this (I searched and couldn't find any posts about similar issues). I work at a company with several Elation Show Designer 1s. They have been reliable, but we had ordered a new set of them a little while back that seem to have been from a different series of production, despite being the same unit type (Show Designer 1). I say this because our original units had blue...
Topic

magic 260 library editor

gaffer ·
Can someone tell me why the magic 260 does not come with at least a link for instructions to edit and upload your own light fixtures? I realize Elation will do it for you but wouldn't it be money well spent for elation not to have to spend the time writing profiles for all of it's magic 260 customers?
Topic

Not able to control amber LEDs

dmack ·
I am not sure what the problem is but I am unable to control the amber LEDs on my Generic PAR 304 fixtures. I am able to control the RGB & W LEDs with no problem. If I go to the channels window, the amber slider, number 6, is there but no matter what I do it never produces and light out of the fixture or in the computer model of the fixture. I can turn on the slider, control it with easytime, but it still produces no light. I can send in the profile I am using but I don't see hot to...
Topic

magic 260 lost profiles

xronis ·
hallo.. i have a dmw controller elation magic 260 and its lost fixture profile. how can i upload fixture profiles? thanks a lot.
Topic

ROM EMPTY!

kmaroo ·
Hello, I have a show designer 3 console. When I turn it on it show me a message "ROM EMPTY, DOWNLOAD NEW SOFTWARE OR INSERT CARD". I don't have a CF card... Can I fix it with RS232 and if it's possible; how can I do it "Pin combination, upload soft, Firmware..." Pleaze it so urgent, I need help. best regard. MARO
Topic

Freeze ups and Lag

russ ·
I currently run version 1.3.69. im using 355 channels of DMX and roughly 30 fixtures and control with a Midicon. I have a couple of questions and concerns. 1)when using the software for about an hour or so it starts to lag. The only way to fix this is to restart the program which also takes a long time. 2.) The software takes atleast 30-40 seconds to fully load on an Pentium i7 with 8gb Ram running windows 8.1 3.) occasionally the software will freeze up completely and I have to restart the...
Topic

Show Designer 2 Com port Fixture upload problems

pacosound ·
Dear Elation crew, I have a brand new Elation Show Designer which I want to upload some fixtures like Chauvet, Martin, ADJ by using a Null modem cable. I use this cable to upload new firmware for my Nexo amplifiers so I know this cable is working fine. But when I connect the cable (which is USB to Serial) and upload the fixtures profiles with SD Back Up tool, nothing happens on the Show Designer and the PC keeps telling it's uploading... It seems endless!!! What do I do wrong? Is this...
Topic

Power Spot 250 homing issues

krclighting ·
Hi all! I've recently picked up 6 power spot 250's (for a heck of a deal, might I say). Four of them were great, one was having a lamp striking issue that I've been able to fix. I'm down to my last fixture issue. When you power on this fixture (lamp off but case open) the gobo and color wheels spin as usual to find their home spot. The gobo wheel seems to be having a problem finding its home. The fixture will get into its home position as if everything is ready to go, but the gobo's...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Hybrid Fixture Firmware

Zach.S ·
Upload tool: E Loader III Proteus Hybrid_V1.6.4 Final Only for V1.6.X units Proteus Hybrid_V1.5.3 Final Only for V1.5.X units Proteus Hybrid_V1.4.3 Final Only for V1.4.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for...
Topic

DMX Duo - *.dat file

kbrown ·
Does anyone have information on the dat files? Are these ASCII based files? We currently have all our equipment in the field and do not have access to a component that can spit out DMX for us to record. The only thing I can think of is to manually create a dat file to upload through the RS232 port. Thanks!!
 
Post
×
×
×
×